H2S (radar)

EN Texto en inglés Aún no hay artículo en tu idioma: extracto en inglés.

H2S was the first airborne, ground scanning radar system. It was developed for the Royal Air Force's Bomber Command during World War II to identify targets on the ground for night and all-weather bombing. This allowed attacks outside the range of the various radio navigation aids like Gee or Oboe, which were limited to about 350 kilometres (220 mi) of range from various base stations. It was also widely used as a general navigation system, allowing landmarks to be identified at long range. In March 1941, experiments with an early aircraft interception radar based on the 9.1 cm wavelength, (3 GHz) cavity magnetron revealed that different objects have very different radar signatures; water, open land and built-up areas of cities and towns all produced distinct returns. In January 1942, a new team was set up to combine the magnetron with a new scanning antenna and plan position indicator display. The prototype's first use in April confirmed that a map of the area below the aircraft could be produced using radar. The first systems went into service in early 1943 as the H2S Mark I and H2S Mark II, as well as ASV Mark III. On its second operational mission on 2/3 February 1943, an H2S was captured almost intact by German forces, and a second unit a week later. Combined with intelligence gathered from the surviving crew, they learned it was a mapping system and were able to determine its method of operation. When they pieced one together from parts and saw the display of Berlin, near panic broke out in the Luftwaffe. This led to the introduction of the FuG 350 Naxos radar detector in late 1943, which enabled Luftwaffe night fighters to home on the transmissions of H2S. The British learned of Naxos and a great debate ensued...