Hard landing

EN Texto en inglés Aún no hay artículo en tu idioma: extracto en inglés.

A hard landing occurs when an aircraft or spacecraft hits the ground with a significantly greater vertical speed and force than in a normal landing. The terms hard landing and firm landing are often confused though are inherently different. A hard landing is never intended; if an aircraft has had a hard landing it must be inspected for damage before its next flight. A firm landing for an aircraft type (e.g. Boeing 737) and specified environmental conditions (e.g. gusty or crosswind conditions, wet runway, etc.) is intended, and even required, by the aircraft manual. Landing is the final phase in flight, in which the aircraft returns to the ground. The average vertical speed in a landing is around 2 metres per second (6.6 ft/s); any greater vertical speed should be classed by crew as hard. Crew judgment is most reliable to determine hard landing, as determination based on recorded acceleration value is difficult and not advisable, partially because there is no recording of true vertical acceleration. Hard landings can be caused by weather conditions, mechanical problems, overweight aircraft, pilot decision, or pilot error. The term hard landing usually implies that the pilot still has total or partial control over the aircraft and is aware of the terrain proximity, as opposed to an uncontrolled descent into terrain or a controlled flight into terrain, both of which can be called a crash. Hard landings can vary in their consequences, from mild passenger discomfort to aircraft damage, structural failure, injuries, and loss of life. Hard landings can cause extensive damage to aircraft. For example, on 20 June 2012, a Boeing 767 of All Nippon Airways landed with such force that a large crease formed in the aircraft's skin. When the final approach is not stabilised, the crew is recommended to abort and go...