Lamborghini V10

EN Texto em inglês Ainda não há artigo no seu idioma: trecho em inglês.

The Lamborghini V10 is a ninety degree (90°) V10 petrol engine which was developed for the Lamborghini Gallardo automobile, first sold in 2003. Developed by Lamborghini, for use in the Gallardo, and the first engine developed for Lamborghini after they were acquired by Audi – part of the Volkswagen Group. This engine has its origins in two concept cars made by Lamborghini, the 1988 P140 and the 1995 Calà. Both were equipped with engines having a 3.9-litre displacement. In the early 2000s, Lamborghini resumed the project and the engine was redesigned by increasing its displacement. The crankcase and engine block are built at the Audi Hungaria Zrt. factory in Győr, Hungary, whilst final assembly is carried out at Sant'Agata Bolognese, Italy. The engine has a 90° V angle and, unusually for a production engine, a dry sump lubrication system is utilised to keep the center of gravity of the engine low. There was also some speculation that the engine block of the original 5.0-litre Lamborghini V10 was closely based on the Audi 4.2 FSI V8, which Audi produces for its luxury cars. However, this was denied by Audi, in their official documentation for their 5.2 FSI V10 engine, as used in the Audi S6 and Audi S8 – the Lamborghini 5.0 V10 has a cylinder bore spacing of 88 millimetres (3.46 in) between centres, whereas the Audi 5.2 V10 cylinder bore spacing is 90 millimetres (3.54 in), the same as the Audi 4.2 FSI V8. The cylinder heads use the four valves per cylinder layout favoured by the Italian firm, rather than the five valve per cylinder variation formerly favoured by the German members of Volkswagen Group – including Audi and Volkswagen Passenger Cars. It was later confirmed that the new 5.2-litre Lamborghini V10 is mechanically identical to the Audi...